Acer Altos G520 Altos G520 User's Guide - Page 49
Opening the server, To open the front bezel
![]() |
View all Acer Altos G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
39 Opening the server Caution! Before you proceed, make sure that you have turned off your system and all peripherals connected to it. Read the "Preinstallation instructions" on page 37. You need to open the server before you can install additional components. The front bezel and left side panel are removable to allow access to the system's internal components. Refer to the following sections for instructions. Before opening the server Before opening the server, observe the following precautions: 1 Turn off the system and all the peripherals connected to it. 2 Unplug all cables from the power outlets. 3 Place the system unit on a flat, stable surface. Note: The illustrations used in this section show the Altos G520 server chassis. To open the front bezel A security lock secures the front bezel to protect your system unit against unauthorized access. To open the front bezel: 1 Insert the key into the lock and turn it clockwise until it points to the unlocked icon . 2 Open the front bezel. To remove the front bezel The front bezel is attached to the chassis by screwless hinges. To remove the front bezel: 1 Unlock the bezel with the key (when necessary).
![](/manual_guide/products/acer-computers-altos-g520-altos-g520-users-guide-1576c81/49.png)