AEG TR739M4B User Manual - Page 22

Cleaning the condenser, 4 Cleaning the drum, 5 Cleaning the control panel and, housing, ENGLISH

Get AEG TR739M4B PDF manuals and user guides View all AEG TR739M4B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

10.3 Cleaning the condenser If the symbol Condenser flashes on the display, inspect the condenser and its compartment. If it is dirty, clean it. Do the check not less than once a 6 months. WARNING! Do not touch the metal surface with bare hands. Risk of injury. Wear protective gloves. Clean carefully to avoid damaging the metal surface. To inspect: 1. Open the door. Pull the filter up. 5. If necessary, remove the fluff from the condenser and its compartment. You can use a vacuum cleaner with a brush attachment. 2. Open the condenser cover. 3. Turn the lever to unlock the condenser lid. 4. Lower the condenser lid. 6. Close the condenser lid. 7. Turn the lever until it clicks into position. 8. Put the filter back. 10.4 Cleaning the drum WARNING! Disconnect the appliance before you clean it. Use a standard neutral soap detergent to clean the inner surface of the drum and drum lifters. Dry the cleaned surfaces with a soft cloth. CAUTION! Do not use abrasive materials or steel wool to clean the drum. 10.5 Cleaning the control panel and housing Use a standard neutral soap detergent to clean the control panel and housing. Use a moist cloth to clean. Dry the cleaned surfaces with a soft cloth. 22 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
10.3 Cleaning the condenser
If the symbol
Condenser
flashes on the
display, inspect the condenser and its
compartment. If it is dirty, clean it. Do the
check not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare
hands. Risk of injury. Wear protective
gloves. Clean carefully to avoid
damaging the metal surface.
To inspect:
1.
Open the door. Pull the filter up.
2.
Open the condenser cover.
3.
Turn the lever to unlock the condenser
lid.
4.
Lower the condenser lid.
5.
If necessary, remove the fluff from the
condenser and its compartment. You can
use a vacuum cleaner with a brush
attachment.
6.
Close the condenser lid.
7.
Turn the lever until it clicks into position.
8.
Put the filter back.
10.4 Cleaning the drum
WARNING!
Disconnect the appliance before you
clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and drum
lifters. Dry the cleaned surfaces with a soft
cloth.
CAUTION!
Do not use abrasive materials or steel
wool to clean the drum.
10.5 Cleaning the control panel and
housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the cleaned
surfaces with a soft cloth.
22
ENGLISH