AEG L9FSC969R User Manual - Page 15

6. BEFORE FIRST USE 1. Make sure that all transit bolts have been removed from the appliance. 2. Make sure that the electrical power is available and the water tap is open. 3. Make sure that there is salt in the Salt compartment marked by and set the proper water hardness level. Refer to "How to set the water hardness level". 4. Pour 2 litres of water into the detergent compartment marked by . 7. CONTROL PANEL 7.1 Control panel description ENGLISH 15 This action activates the drain system. 5. Pour a small quantity of detergent into the compartment marked by . 6. Set and start a programme for cotton at the highest temperature without any laundry in the drum. This removes all possible dirt from the drum and the tub. 1 2 3 4 5 13 12 11 10 9 8 7 6 1 Programme dial 2 Display 3 Energy saving touch button (Eco) 4 Time saving touch button (Time Save) 5 Skipping phase touch button (Options) • Wash phase skipping (Rinse only) • Wash and rinse phase skipping (Spin only) • Only drain (Drain only) 6 Start/Pause touch button (Start/ Pause) 7 Extra rinse touch button (Extra Rinse) 8 Delay start touch button (Delay Start) 9 Super steam touch button (Plus Steam) 10 Anti-stain and prewash touch button (Stains/Prewash) 11 Spin reduction touch button (Spin) 12 On/Off push button (On/Off)