AEG L7FBE941R User Manual - Page 24

Programme phase, indicators, Interrupting a, programme and changing the, options, Cancelling

Get AEG L7FBE941R PDF manuals and user guides View all AEG L7FBE941R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

24 www.aeg.com this case, it will be not possible to guarantee the best washing results. About 20 minutes after the programme start, the programme duration could be adjusted again depending on the capacity of water absorption of the fabrics. The ProSense detection is carried out with complete washing programmes only (no skipping phase selected). 10.9 Programme phase indicators When the programme starts the indicator of the running phase flashes and the other phase indicators are steady on. E.g. the washing or pre wash phase is running: . When the phase ends the relevant indicator stops flashing and is steady on. The next phase indicator starts flashing. E.g. the rinse phase is running: . If you select the Plus Steam the steam phase indicators come on. The steam phase is running: . The anti-crease phase is running: . 10.10 Interrupting a programme and changing the options When the programme is running, you can change only some options: 1. Touch the button Start/Pause. The related indicator flashes. 2. Change the options. The given information in the display changes accordingly. 3. Touch the button Start/Pause again. The washing programme continues. 10.11 Cancelling a running programme 1. Press the button On/Off to cancel the programme and to deactivate the appliance. 2. Press the button On/Off again to activate the appliance. Now, you can set a new washing programme. If the ProSense phase is already carried out and the water filling is already started, the new programme starts without repeating the ProSense phase. The water and the detergent are not drained out in order to avoid waste. The display shows the maximum duration of the programme, updating it about 20 minutes after the starting of the new programme. 10.12 Opening the door If the temperature and level of the water in the drum are too high and/or the drum still rotates you cannot open the door. While a programme or the delay start operates, the appliance door is locked. 1. Touch the button Start/Pause. In the display the related door lock indicator goes off. 2. Open the appliance door. If necessary, add or remove the items. 3. Close the door and touch the button Start/Pause. The programme or the delay start continues. 10.13 End of the programme When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are active).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again
depending on the capacity
of water absorption of the
fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
10.9
Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
.
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
If you select the Plus Steam the steam
phase indicators come on.
The steam phase is running:
.
The anti-crease phase is running:
.
10.10
Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1.
Touch the button Start/Pause.
The related indicator flashes.
2.
Change the options. The given
information in the display changes
accordingly.
3.
Touch the button Start/Pause again.
The washing programme continues.
10.11
Cancelling a running
programme
1.
Press the button On/Off to cancel
the programme and to deactivate
the appliance.
2.
Press the button On/Off again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts
without repeating
the ProSense phase
. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.
10.12
Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
While a programme or the delay start
operates, the appliance door is locked.
1.
Touch the button Start/Pause.
In the display the related door lock
indicator goes off.
2.
Open the appliance door. If
necessary, add or remove the items.
3.
Close the door and touch the button
Start/Pause.
The programme or the delay start
continues.
10.13
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
www.aeg.com
24