AEG KMK721000M User Manual - Page 29

Technical Data

Page 29 highlights

ENGLISH 29 Problem Possible cause Remedy The display shows an error There is an electrical fault. code that is not in this table. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows the error code again, contact the Customer Care Department. Steam and condensation You left the dish in the oven settle on the food and in the for too long. cavity of the oven. Do not leave the dishes in the oven for longer than 15 20 minutes after the cooking process ends. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the appliance. 2. Touch and hold until the appliance activates and deactivates. 3. Touch and hold and at the same time until an acoustic signal sounds. "Demo" goes out. 14.2 Service data If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) 15. TECHNICAL DATA 15.1 Technical data Voltage Frequency 220 - 240 V 50 Hz

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Problem
Possible cause
Remedy
The display shows an error
code that is not in this table.
There is an electrical fault.
Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the
error code again, contact
the Customer Care De-
partment.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activa-
ted.
1.
Deactivate the appli-
ance.
2.
Touch and hold
until
the appliance activates
and deactivates.
3.
Touch and hold
and
at the same time un-
til an acoustic signal
sounds.
"Demo"
goes
out.
14.2
Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
15.
TECHNICAL DATA
15.1
Technical data
Voltage
220 - 240 V
Frequency
50 Hz
ENGLISH
29