AEG FSS62807P User Manual - Page 24

The product number, code PNC, The washing and drying results are not satisfactory

Get AEG FSS62807P PDF manuals and user guides View all AEG FSS62807P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

24 www.aeg.com Problem and alarm code The appliance trips the circuit-beaker. Possible cause and solution • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. • Internal electrical fault of the appliance. Contact an Authorised Service Centre. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre. 11.1 The product number code (PNC) If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. The PNC can be found on the rating plate on the appliance door. You can also check the PNC on the control panel. Before checking the PNC, make sure the appliance is in the programme selection. 1. Press and hold simultaneously and for about 3 seconds. The display shows the PNC of your appliance. 2. To exit the PNC presentation, press and hold simultaneously and for about 3 seconds. The appliance returns to the programme selection. 11.2 The washing and drying results are not satisfactory Problem Poor washing results. Poor drying results. Possible cause and solution • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the wash- ing results of a selected programme. • Clean spray arm jets and filter. Refer to "Care and Cleaning". • Tableware was left for too long inside the closed appliance. Activate AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the level of rinse aid to a higher level. • The quality of the rinse aid can be the cause. • We recommend to use rinse aid always, even in com- bination with multi-tablets. • Plastic items may need to be towel dried. • The programme does not have the drying phase. Re- fer to "Programmes overview".

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Problem and alarm code
Possible cause and solution
The appliance trips the cir-
cuit-beaker.
•
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
•
Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
11.1
The product number
code (PNC)
If you contact an Authorised Service
Centre, you need to provide the product
number code of your appliance.
The PNC can be found on the rating
plate on the appliance door. You can
also check the PNC on the control panel.
Before checking the PNC, make sure the
appliance is in the programme selection.
1.
Press and hold simultaneously
and
for about 3 seconds.
The display shows the PNC of your
appliance.
2.
To exit the PNC presentation, press
and hold simultaneously
and
for about 3 seconds.
The appliance returns to the programme
selection.
11.2
The washing and drying results are not satisfactory
Problem
Possible cause and solution
Poor washing results.
•
Refer to
"Daily use"
,
"Hints and tips"
and the basket
loading leaflet.
•
Use more intensive washing programme.
•
Activate the ExtraPower option to improve the wash-
ing results of a selected programme.
•
Clean spray arm jets and filter. Refer to
"Care and
Cleaning"
.
Poor drying results.
•
Tableware was left for too long inside the closed ap-
pliance. Activate AirDry to set the automatic opening
of the door and to improve the drying performance.
•
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the level of
rinse aid to a higher level.
•
The quality of the rinse aid can be the cause.
•
We recommend to use rinse aid always, even in com-
bination with multi-tablets.
•
Plastic items may need to be towel dried.
•
The programme does not have the drying phase. Re-
fer to
"Programmes overview"
.
www.aeg.com
24