3M X70 Safety Guide - Page 7

WARNING, continued, CAUTION - projector lens

Page 7 highlights

ENGLISH WARNING (continued) • To reduce the risk associated with the hot surface temperatures produced by the projection lamp, which if not avoided may result in death or serious injury: - Never touch the projection lamp or surrounding surfaces while the lamp is still hot. - Switch projector "OFF", remove the power cord from the electrical outlet, and allow the unit to cool for at least 45 minutes before replacing the lamp. • To reduce the risk associated with air or ground water contamination, which if not avoided could result in death or serious injury: - The lamp in this product contains mercuy. Dispose of projection lamp in a manner that is consistent with your local hazardous waste regulations for mercury. - For recycling and disposal information, contact your respective governmental agencies. In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org In Canada, contact the Electronic Product Stewardship Canada at www.epsc.ca CAUTION • To reduce the risk associated with laser radiation, which if not avoided may result in minor or moderate injury: - Never look directly at the laser output of the remote control or point it at other people. - Never attempt to make any adjustments to the internal controls of the remote control other than those described in the Operator's Guide. • To reduce the risks associated with fire, explosion, chemical leakage, and/or poisoning, which if not avoided may result in minor or moderate injury and/or property damage: - Use only the specified batteries with this remote control transmitter. - Never mix old and new batteries. - Use care to orient the plus (+) and minus (-) terminals of the batteries according to the markings found on the remote control. - Use and handle batteries in a manner that avoids damaging them. - Keep batteries away from children and pets. - Remove the batteries from the remote control when not to be used for an extended period. • To reduce the risk associated with air or ground water contamination, which if not avoided may result in minor or moderate injury: - Dispose of batteries in a manner that is consistent with your local hazardous waste regulations. • To reduce the various risks associated with this product, which if not avoided may result in minor or moderate injury and/or property damage: - Do not expose this projector to direct sunlight, or use it outdoors. - Always operate the unit on a flat, sturdy, and horizontal surface. - Never operate the unit in a vertical orientation such that the lens points up or down. - Do not insert liquids or foreign object. To avoid penetration of foreign objects, do not put the projector into a case or bag together with anything except the accessories of projector, signal cables and connectors. © 3M 2004 3M™ Multimedia Projector X70/X80 Product Safety Guide 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

3M™ Multimedia Projector X70/X80 Product Safety Guide
© 3M 2004
7
WARNING
(continued)
To reduce the risk associated with the hot surface temperatures produced by
the projection lamp, which if not avoided may result in death or serious injury:
-
Never touch the projection lamp or surrounding surfaces while the lamp is still hot.
-
Switch projector “OFF”, remove the power cord from the electrical outlet, and
allow the unit to cool for at least 45 minutes before replacing the lamp.
To reduce the risk associated with air or ground water contamination, which if
not avoided could result in death or serious injury:
-
The lamp in this product contains mercuy. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
-
For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at
www
.lamprecycle.org
In Canada, contact the Electronic Product Stewardship Canada at
www
.epsc.ca
CAUTION
To reduce the risk associated with laser radiation, which if not avoided may
result in minor or moderate injury:
-
Never look directly at the laser output of the remote control or point it at other
people.
-
Never attempt to make any adjustments to the internal controls of the remote
control other than those described in the Operator’s Guide.
To reduce the risks associated with fire, explosion, chemical leakage, and/or
poisoning, which if not avoided may result in minor or moderate injury and/or
property damage:
-
Use only the specified batteries with this remote control transmitter.
-
Never mix old and new batteries.
-
Use care to orient the plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
-
Use and handle batteries in a manner that avoids damaging them.
-
Keep batteries away from children and pets.
-
Remove the batteries from the remote control when not to be used for an
extended period.
To reduce the risk associated with air or ground water contamination, which if
not avoided
may result in minor or moderate injury:
-
Dispose of batteries in a manner that is consistent with your local hazardous
waste regulations.
To reduce the various risks associated with this product, which if not avoided
may result in minor or moderate injury and/or property damage:
-
Do not expose this projector to direct sunlight, or use it outdoors.
-
Always operate the unit on a flat, sturdy, and horizontal surface.
-
Never operate the unit in a vertical orientation such that the lens points up or down.
-
Do not insert liquids or foreign object. To avoid penetration of foreign objects, do
not put the projector into a case or bag together with anything except the
accessories of projector, signal cables and connectors.
ENGLISH