2013 Yamaha Motorsports V Star 650 Custom Owners Manual - Page 74
2013 Yamaha Motorsports V Star 650 Custom Manual
Page 74 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU25080 Rear wheel EAU25142 To remove the rear wheel EWA10821 4. Remove the brake pedal free play adjusting nut, and then disconnect the brake rod from the brake camshaft lever. WARNING To avoid injury, securely support the vehicle so there is no danger of it falling over. 1. Loosen the axle nut. 1. Bolt 2. Final gear case 7 1. 2. 3. 4. 5. 6. 1. Axle nut Brake pedal free play adjusting nut Brake camshaft lever Bolt and nut (shoe plate) Brake torque rod Bolt and nut (swingarm) Brake rod 2. Disconnect the brake torque rod from the brake shoe plate by removing the bolt and nut. 3. Loosen the brake torque rod nut at the swingarm. 5. Remove panel A. (See page 7-9.) 6. Remove the bolts that secure the final gear case to the swingarm. 7. Lift the rear wheel off the ground according to the procedure on page 7-34. 8. While supporting the drive shaft, pull the rear wheel back to remove the following parts as an assembly: wheel, wheel axle, final gear case, and drive shaft. 7-36