2013 Yamaha Motorsports Stryker Owners Manual - Page 74
2013 Yamaha Motorsports Stryker Manual
Page 74 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24213 EAU24330 Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screws. License plate light 1 If the license plate light does not come on, have a Yamaha dealer check the electrical circuit or replace the bulb. 1 2 1. Turn signal light bulb 1. Turn signal light lens 2. Screw 7 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break. [ECA10681] 7-33
PERIODIC MAINTENANCE AND ADJUSTMENT
7-33
7
EAU24213
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
EAU24330
License plate light
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
1.
Turn signal light lens
2. Screw
2
1
1.
Turn signal light bulb
1