2013 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 34
2013 Yamaha Motorsports Road Star Silverado S Manual
Page 34 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU14583 Windshield [XV17ATSD(C)] To suit the rider's preference, the windshield angle can be adjusted and the height can be changed to one of two positions. To adjust the windshield angle 1. Loosen the bolts on each side of the windshield. 4 Tightening torque: Windshield bolt: 16 Nm (1.6 m·kgf, 12 ft·lbf) To change the windshield height 1. Remove the bolts on each side of the windshield. 2. Move the windshield to the other position. 4. Loosen the screws holding the windshield cover located above the headlight, position the cover close to the headlight without touching it, and then tighten the screws. 1. Windshield cover 2. Screw EWA10920 1. Windshield 2. Bolt 1. Windshield 2. Bolt WARNING After adjusting the windshield: ● Securely tighten the windshield bolts. ● Turn the handlebar to the left and right to make sure that the handlebar is not obstructed and that the windshield does not contact any other parts. 2. Move the windshield to the desired angle. 3. Tighten the bolts to the specified torque. 3. Install the bolts and tighten them to the specified torque. Tightening torque: Windshield bolt: 16 Nm (1.6 m·kgf, 12 ft·lbf) 4-14