2012 Yamaha Motorsports V Star 1300 Owners Manual - Page 31
2012 Yamaha Motorsports V Star 1300 Manual
Page 31 highlights
INSTRUMENT AND CONTROL FUNCTIONS To release the helmet from the helmet holder Remove the rider seat, remove the helmet from the helmet holder, and then install the seat. EAU42546 Adjusting the shock absorber assembly This shock absorber assembly is equipped with a spring preload adjusting ring, allowing the spring preload to be adjusted to suit the rider's preference. It is recommended to have a Yamaha dealer adjust the spring preload. Should you choose to make the adjustment, use the special wrench included in the additional tool kit, which was handed out separately at the purchase of the vehicle. ECA10101 1. Shock absorber assembly 2. Position indicator 3. Spring preload adjusting ring 4 NOTICE To avoid damaging the mechanism, do not attempt to turn beyond the maximum or minimum settings. Adjust the spring preload as follows. To increase the spring preload and thereby harden the suspension, turn the adjusting ring in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting ring in direction (b). TIP Align the appropriate notch in the adjusting ring with the position indicator on the shock absorber. Spring preload setting: Minimum (soft): 1 Standard: 4 Maximum (hard): 9 4-14