2012 Yamaha Motorsports Roadliner S Owners Manual - Page 32

2012 Yamaha Motorsports Roadliner S Manual

Page 32 highlights

INSTRUMENT AND CONTROL FUNCTIONS EAU34042 EAU38342 Rider seat To remove the rider seat 1. Insert the key into the seat lock, and then turn it counterclockwise. Helmet holder 1 2 4 1. Projection 2. Seat holder 2. Push the front of the seat down to lock it in place. 3. Remove the key. 1. Seat lock 2. Unlock. 1. Helmet holder 2. Helmet holding cable 2. While holding the key in that position, lift the front of the seat up, and then pull the seat off. To install the rider seat 1. Insert the projection on the rear of the seat into the seat holder as shown. TIP Make sure that the seat is properly secured before riding. The helmet holder is located under the rider seat. A helmet holding cable is provided beside the owner's tool kit to secure a helmet to the helmet holder. To secure a helmet to the helmet holder 1. Remove the rider seat. (See page 4-14.) 2. Pass the helmet holding cable through the buckle on the helmet strap as shown, and then hook the cable loop over the helmet holder. 4-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
EAU34042
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2.
While holding the key in that posi-
tion, lift the front of the seat up, and
then pull the seat off.
To install the rider seat
1.
Insert the projection on the rear of
the seat into the seat holder as
shown.
2.
Push the front of the seat down to
lock it in place.
3.
Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU38342
Helmet holder
The helmet holder is located under the
rider seat. A helmet holding cable is
provided beside the owner’s tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1.
Remove the rider seat. (See page
4-14.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
1.
Seat lock
2. Unlock.
1. Projection
2.
Seat holder
1.
Helmet holder
2.
Helmet holding cable
1
2