2012 Yamaha Motorsports Raider S Owners Manual - Page 35
2012 Yamaha Motorsports Raider S Manual
Page 35 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU44586 Auxiliary DC connector EWA12531 2 2 WARNING To prevent electrical shock or shortcircuiting, make sure that the cap is installed when the auxiliary DC connector is not being used. ECA15311 1 1 1. Battery band 2. Battery cover 1. Wire harness protective cover 2. Auxiliary DC connector 3. Auxiliary DC connector cap 3 4 NOTICE The accessory connected to the auxiliary DC connector should not be used with the engine turned off, and the load must never exceed 36 W (3 A), otherwise the fuse may blow or the battery may discharge. To access the auxiliary DC connector 1. Remove the rider seat. (See page 4-12.) 2. Unhook the battery band, and then remove the battery cover. 3. Turn the ECU over to move it away from the wire harness protective cover as shown. 2 A 12-V accessory connected to the auxiliary DC connector under the rider seat can be used when the key is in the "ON" position. 1 1. Wire harness protective cover 2. ECU 4. Open the wire harness protective cover. 4-18