2012 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 24
2012 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 24 highlights
EBU30490 Multi-function display G G G an hour meter (which shows the total time the engine has been running) a fuel meter a self-diagnosis device 4 1. 2. 3. 4. 5. 6. 7. "CLOCK" button "RESET" button "SELECT" button Speedometer Fuel meter Clock/Hour meter Odometer/Tripmeter A/Tripmeter B Odometer and tripmeter modes Pushing the "SELECT" button switches the display between the odometer mode "ODO" and the tripmeter modes "TRIP A" and "TRIP B" in the following order: ODO → TRIP A → TRIP B → ODO To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button for at least three seconds. The tripmeters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. TIP Pushing and holding in the "SELECT" button, and turning the key to " " (on) while the button is pushed, switches the display between "mph" and "km/h". The multi-function display is equipped with the following: G a speedometer G an odometer G two tripmeters (which show the distance traveled since they were last set to zero) G a clock 4-5