2012 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 100
2012 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 100 highlights
1. O-ring 1. Torque wrench TIP Make sure that the O-ring is properly seated. 8 9. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 10. Install panels D and C. 11. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. Tightening torque: Engine oil drain bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 8-20
8-20
8
TIP
Make sure that the O-ring is properly seated.
9.
Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
10.
Install panels D and C.
11. Install the engine oil drain bolt and its new
gasket, and then tighten the bolt to the speci-
fied torque.
1. O-ring
1.
Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
Tightening torque:
Engine oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)