2012 Yamaha Motorsports FX Nytro Owners Manual - Page 41
2012 Yamaha Motorsports FX Nytro Manual
Page 41 highlights
Control functions Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting screw fully turned in direction (a) FX10XT The compression damping force can be adjusted by turning the adjusting knob. To increase the compression damping force, turn the adjusting knob in direction (a). To decrease the compression damping force, turn the adjusting knob in direction (b). ESU11034 Adjusting the control rods (FX10XT) EWS00770 WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. The weight transfer can be adjusted by turning the adjusting nuts on the control rods. 1. Loosen the locknut while holding the adjusting nut. 1 (b) (a) 1. Compression damping force adjusting knob Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) 1. Locknut 2. Control rod adjusting nut 2. To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum set- 35