2011 Yamaha Motorsports Venture Lite Owners Manual - Page 58

2011 Yamaha Motorsports Venture Lite Manual

Get 2011 Yamaha Motorsports Venture Lite PDF manuals and user guides View all 2011 Yamaha Motorsports Venture Lite manuals

Page 58 highlights

Periodic maintenance and adjustment You should periodically remove and inspect the spark plugs because heat and deposits will cause any spark plug to slowly break down and erode. Consult a Yamaha dealer before changing to a different type of spark plug. Specified spark plug: Manufacturer: NGK Model: CR9E EWS00710 1. Spark plug gap 2. Spark plug reach WARNING Be sure to use the specified spark plug and spark plug cap. Otherwise, the T.O.R.S. may not work properly. Spark plugs are produced in several different thread lengths. The thread length or reach is the distance from the spark plug gasket seat to the end of the threaded portion. If the reach is too long, overheating and engine damage may result. If the reach is too short, spark plug fouling and poor performance may result. Also, if the reach is too short, carbon will form on the exposed threads resulting in combustion chamber hot spots and thread damage. Always use a spark plug with the specified reach. Spark plug reach: 19.0 mm (0.75 in) Before installing any spark plug, measure the spark plug gap with a wire thickness gauge and adjust to specification. Spark plug gap: 0.7-0.8 mm (0.028-0.031 in) When installing the spark plug, always clean the gasket surface. Wipe off any grime from the threads and tighten the spark plug to the specified torque. Spark plug tightening torque: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) ECS00382 NOTICE Make sure that the spark plug caps are securely installed. Otherwise the spark plug caps could be damaged due to engine vibration. ESU13662 Adjusting the throttle lever free play 1. 2. 3. Slide the rubber cover back. Loosen the locknut. To increase the throttle lever free play, turn the adjusting nut in direction (a). To decrease the throttle lever free play, turn the adjusting nut in direction (b). 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Periodic maintenance and adjustment
52
You should periodically remove and inspect
the spark plugs because heat and deposits
will cause any spark plug to slowly break
down and erode. Consult a Yamaha dealer
before changing to a different type of spark
plug.
WARNING
EWS00710
Be sure to use the specified spark plug
and spark plug cap. Otherwise, the
T.O.R.S. may not work properly.
Spark plugs are produced in several different
thread lengths. The thread length or reach is
the distance from the spark plug gasket seat
to the end of the threaded portion. If the reach
is too long, overheating and engine damage
may result. If the reach is too short, spark plug
fouling and poor performance may result. Al-
so, if the reach is too short, carbon will form on
the exposed threads resulting in combustion
chamber hot spots and thread damage. Al-
ways use a spark plug with the specified
reach.
Before installing any spark plug, measure the
spark plug gap with a wire thickness gauge
and adjust to specification.
When installing the spark plug, always clean
the gasket surface. Wipe off any grime from
the threads and tighten the spark plug to the
specified torque.
NOTICE
ECS00382
Make sure that the spark plug caps are se-
curely installed. Otherwise the spark plug
caps could be damaged due to engine vi-
bration.
ESU13662
Adjusting the throttle lever free
play
1.
Slide the rubber cover back.
2.
Loosen the locknut.
3.
To increase the throttle lever free play,
turn the adjusting nut in direction (a). To
decrease the throttle lever free play, turn
the adjusting nut in direction (b).
Specified spark plug:
Manufacturer:
NGK
Model:
CR9E
Spark plug reach:
19.0 mm (0.75 in)
1.
Spark plug gap
2.
Spark plug reach
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
Spark plug tightening torque:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)