2011 Yamaha Motorsports V Star 1300 Tourer Owners Manual - Page 74

2011 Yamaha Motorsports V Star 1300 Tourer Manual

Page 74 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU42473 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. ECA10650 NOTICE Take care not to damage the following parts: G Headlight bulb Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. G Headlight lens Do not affix any type of tinted film or stickers to the headlight lens. Do not use a headlight bulb of a wattage higher than specified. 1. Do not touch the glass part of the bulb. 1. Bolt 1. Remove the turn signal/position light bracket cover by removing the bolts. 3. Disconnect the headlight coupler, and then remove the bulb cover. 7 1 2 1. Turn signal/position light bracket cover 2. Bolt 1. Headlight bulb cover 2. Headlight coupler 2. Remove the headlight unit by removing the bolts on each side. 7-31 4. Unhook the headlight bulb holder, and then remove the burnt-out bulb.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

PERIODIC MAINTENANCE AND ADJUSTMENT
7-31
7
EAU42473
Replacing the headlight bulb
This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10650
Take care not to damage the follow-
ing parts:
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
1. Remove the turn signal/position
light bracket cover by removing the
bolts.
2. Remove the headlight unit by re-
moving the bolts on each side.
3.
Disconnect the headlight coupler,
and then remove the bulb cover.
4.
Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1.
Do not touch the glass part of the bulb.
1.
Turn signal/position light bracket cover
2. Bolt
1. Bolt
1.
Headlight bulb cover
2.
Headlight coupler
1
2