2011 Yamaha Motorsports Stryker Owners Manual - Page 73
2011 Yamaha Motorsports Stryker Manual
Page 73 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 5. Install the headlight bulb cover, and then connect the coupler. TIP When installing the headlight bulb cover, make sure the "TOP" mark faces upwards. EAU24181 EAU24212 Tail/brake light This model is equipped with an LEDtype tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1 2 1 TOP 1. Turn signal light lens 2. Screw 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 1. "TOP" mark 7 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 7-32