2011 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 21

EBU28664 Coolant temperature warning light " " This warning light comes on when the engine overheats. When this occurs during operation, stop the engine as soon as it is safe to do so and allow it to cool down for about 10 minutes. The electrical circuit of the warning light can be checked by turning the key to "ON". The warning light should come on for a few seconds, and then go off. If the warning light does not come on initially when the key is turned to "ON", or if the warning light remains on, have a Yamaha dealer check the electrical circuit. ECB00891 G Start the engine after making sure that the warning light is out. Continuous use while the warning light is on may cause damage to the engine. EBU27284 NOTICE The engine may overheat if the ATV is overloaded. In this case, reduce the load to specification. G The engine may also overheat if mud or dirt has accumulated on the radiator (i.e., after riding in wet terrain). In this case, see page 8-22 for an explanation on how to access the radiator. G Engine trouble warning light " " This warning light comes on or flashes when an electrical circuit monitoring the engine is not working correctly. When this occurs, have a Yamaha dealer check the self-diagnosis system. (See page 4-6 for an explanation of the self-diagnosis device.) The electrical circuit of the warning light can be checked by turning the key to "ON". The warning light should come on for a few seconds, and then go off. If the warning light does not come on initially when the key is turned to "ON", or if the warning light remains on, have a Yamaha dealer check the electrical circuit. 4 4-3