2011 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 126
2011 Yamaha Motorsports Grizzly 700 4x4 EPS Manual
Page 126 highlights
5. Slide the rubber cover to its original position. EBU24060 EWB02571 Valve clearance The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. EBU24071 WARNING Operating with improperly serviced or adjusted brakes could lead to a loss in braking ability and an accident. EBU27470 Checking the front and rear brake pads The front and rear brake pads must be checked for wear at the intervals specified in the periodic maintenance and lubrication chart. Each brake pad is provided with a wear indicator groove, which allows you to check the brake pad wear without having to disassemble the brake. If a brake pad has worn to the point that the wear indicator groove has almost disappeared, have a Yamaha dealer replace the brake pads as a set. TIP The wheels need to be removed to check the brake pads. (See page 8-64.) Adjusting the drive select lever safety system cable 8 The drive select lever safety system cable stretches with use, which can result in improper function. Therefore, the safety system cable should be checked and adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. EBU29601 Brakes Replacement of brake components requires professional knowledge. Brake service should be performed by a Yamaha dealer. 8-46