2011 Yamaha Motorsports Grizzly 450 4x4 EPS Owners Manual - Page 26
2011 Yamaha Motorsports Grizzly 450 4x4 EPS Manual
Page 26 highlights
EBU18080 Engine stop switch " / " Set this switch to " " before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to " ". 4 EBU18101 If this should happen, remove the battery and recharge it. See page 8-51 for battery charging information. EBU18190 Override switch "OVERRIDE" Start switch " " Push this switch to crank the engine with the starter. See the starting instructions on page 6-1 prior to starting the engine. EBU18152 Light switch " / /OFF" Set this switch to " " to turn on the low beams and the taillight. Set the switch to " " to turn on the high beams and the taillight. Set the switch to "OFF" to turn off all the lights. ECB00041 1. Override switch "OVERRIDE" NOTICE Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. 4-7 Top speed is normally limited when operating in differential gear lock. If conditions require more engine power when riding forward, push and hold this switch to override the differential gear lock speed limiting function. (See page 4-9.) Releasing the switch restores the speed limiting function.