2011 Yamaha Motorsports FX Nytro XTX Owners Manual - Page 32
2011 Yamaha Motorsports FX Nytro XTX Manual
Page 32 highlights
Control functions To increase the rebound damping force, turn the adjusting knob in direction (a). To decrease the rebound damping force, turn the adjusting knob in direction (b). FX10RTRS TIP The damping forces will not decrease past the minimum levels even if the adjusting knobs are turned out more than the minimum settings. ESU13134 Adjusting the spring preload of the center shock absorber and the rear torsion springs (FX10/FX10RTRS/FX10XT) The spring preload can be adjusted by turning the adjusting nut on the center shock absorber and the adjusters on the rear torsion springs. Adjust the spring preload as follows. Center shock absorber 1. Loosen the locknut. 2. To increase the spring preload and thereby harden the suspension, turn the adjusting nut in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting nut in direction (b). 1. Rebound damping force adjusting knob FX10/FX10XT 1. Rebound damping force adjusting knob 1 2 (a) (b) 1. Spring preload adjusting nut 2. Distance A 3. Locknut Rebound damping setting: Minimum (soft): FX10/FX10XT 20 FX10RTRS 19 click(s) in direction (b)* Standard: FX10/FX10XT 11 FX10RTRS 10 click(s) in direction (b)* Maximum (hard): FX10/FX10XT 3 FX10RTRS 1 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) 3 26