2011 Yamaha Motorsports FX Nytro MTX SE 153 Owners Manual - Page 79
2011 Yamaha Motorsports FX Nytro MTX SE 153 Manual
Page 79 highlights
Periodic maintenance and adjustment 4. Align the drive track by turning the left and right adjusting nuts. Drive track alignment Left adjusting nut Right adjusting nut Shifted to right Turn out Turn in Shifted to left Turn in Turn out Shifted to left 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 5. 1. Left adjusting nut 2. Right adjusting nut Adjust the drive track deflection to specification. NOTICE: The right and left adjusting nuts should be turned an equal amount. [ECS00592] Drive track deflection More than specified Turn in Turn in Less than specified Turn out Turn out Shifted to right Left adjusting nut Right adjusting nut 6. 7. 8. 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Lower the snowmobile to the ground. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) Slide runners Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. 73
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74 -
75 -
76 -
77 -
78 -
79 -
80 -
81 -
82 -
83 -
84 -
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
 |
 |
