2010 Yamaha Motorsports Venture Lite Owners Manual - Page 71
2010 Yamaha Motorsports Venture Lite Manual
Page 71 highlights
Periodic maintenance and adjustment 1. 2. 3. Place the snowmobile on a level surface and apply the parking brake. Remove the right side cover. (See page 48 for removal procedures.) Check the brake pads for wear. If the brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1. Parking brake pad wear limit Parking brake pad wear limit: 1.2 mm (0.047 in) 3. Install the right side cover. To adjust the parking brake As the parking brake pads wear, adjustment may be necessary to ensure proper brake performance. 1. Remove the right side cover. (See page 48 for removal procedures.) 2. Loosen the parking brake pad adjusting bolt locknut and the parking brake pad adjusting bolt. 3. Loosen the parking brake cable locknut. 4. Turn the parking brake cable adjusting bolt in or out to adjust the cable length. 1. Brake pad wear indicator 2. Brake pad wear limit Brake pad wear limit: 4.7 mm (0.19 in) 4. Install the right side cover. Checking the parking brake pads Check the parking brake pads for wear according to the following procedure. 1. Remove the right side cover. (See page 48 for removal procedures.) 2. Check the parking brake pads for wear by measuring the thickness of the pads. If the parking brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1. 2. 3. 4. 5. Parking brake pad adjusting bolt locknut Parking brake pad adjusting bolt Parking brake cable locknut Parking brake cable adjusting bolt Parking brake cable length 65