2010 Yamaha Motorsports V Star Classic Owners Manual - Page 27

2010 Yamaha Motorsports V Star Classic Manual

Page 27 highlights

INSTRUMENT AND CONTROL FUNCTIONS EAU13620 EAU14184 Starter (choke) knob " " Seats (XVS65Z) Passenger seat To remove the passenger seat Remove the nut and washer, and then pull the passenger seat up. Tightening torque: Passenger seat nut: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) 4 1. Starter (choke) knob " " 1. Passenger seat holder 2. Projection Starting a cold engine requires a richer air-fuel mixture, which is supplied by the starter (choke). Move the knob in direction (a) to turn on the starter (choke). Move the knob in direction (b) to turn off the starter (choke). ECA10990 Rider seat 1. Nut 2. Washer NOTICE Do not use the starter (choke) for more than 3 minutes as the exhaust pipe may discolor from excessive heat. In addition, extended use of the starter (choke) will cause afterburning. If this occurs, turn off the starter (choke). To install the passenger seat 1. Insert the projection on the front of the passenger seat into the seat holder as shown and place the seat in the original position. 2. Install the washer and nut, and then tighten the nut to the specified torque. 4-10 To remove the rider seat 1. Remove the passenger seat. 2. Remove the passenger seat holder by removing its bolts, and then pull the rider seat up.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102

INSTRUMENT AND CONTROL FUNCTIONS
4-10
4
EAU13620
Starter (choke) knob “
Starting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the knob in direction (a) to turn on
the starter (choke).
Move the knob in direction (b) to turn off
the starter (choke).
NOTICE
ECA10990
Do not use the starter (choke) for
more than 3 minutes as the exhaust
pipe may discolor from excessive
heat. In addition, extended use of
the starter (choke) will cause after-
burning. If this occurs, turn off the
starter (choke).
EAU14184
Seats (XVS65Z)
Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
To install the passenger seat
1.
Insert the projection on the front of
the passenger seat into the seat
holder as shown and place the
seat in the original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
Rider seat
To remove the rider seat
1.
Remove the passenger seat.
2.
Remove the passenger seat hold-
er by removing its bolts, and then
pull the rider seat up.
1.
Starter (choke) knob “
1. Nut
2. Washer
Tightening torque:
Passenger seat nut:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
1.
Passenger seat holder
2. Projection