2010 Yamaha Motorsports V Star 950 Owners Manual - Page 23
2010 Yamaha Motorsports V Star 950 Manual
Page 23 highlights
INSTRUMENT AND CONTROL FUNCTIONS TRIP F → TRIP A → TRIP B → ODO → TRIP F To reset a tripmeter, select it by pushing the "SELECT" switch, and then push the "RESET" switch for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after refueling and traveling 5 km (3 mi). To set the clock: 3. Push the "SELECT" switch, and the minute digits will start flashing. 4. Push the "RESET" switch to set the minutes. 5. Push the "SELECT" switch and then release it to start the clock. Self-diagnosis device If the odometer/tripmeter/clock display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. ECA11590 NOTICE If the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. 4 Brightness control mode 1 1 1. Error code display 1. Clock 1. Push the "SELECT" and "RESET" switches together for at least three seconds. 2. When the hour digits start flashing, push the "RESET" switch to set the hours. This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the engine trouble warning light will come on and the odometer/tripmeter/clock display will indicate an error code. 1 1. Brightness level This function allows you to adjust the brightness of the multi-function meter unit panel to suit the outside lighting conditions. 4-5