2010 Yamaha Motorsports V Star 250 Owners Manual - Page 69
2010 Yamaha Motorsports V Star 250 Manual
Page 69 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24212 Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1. Tail/brake light bulb 1. Turn signal light bulb 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break. [ECA10681] 1. Screw 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break. [ECA10681] 7 7-34
PERIODIC MAINTENANCE AND ADJUSTMENT
7-34
7
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
EAU24212
Replacing a turn signal light
bulb
1.
Remove the turn signal lens by re-
moving the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
1.
Tail/brake light bulb
1. Screw
1.
Turn signal light bulb