2010 Yamaha Motorsports Stratoliner S Owners Manual - Page 35

2010 Yamaha Motorsports Stratoliner S Manual

Page 35 highlights

INSTRUMENT AND CONTROL FUNCTIONS 1. Fastener To close a sidebag lid 1. Fold the sidebag lid down so that the latch snaps into place. 2. Turn the key clockwise, and then remove it. To remove a sidebag 1. Open the sidebag lid. 2. Turn the fasteners counterclockwise, and then remove the sidebag by pulling it upward. TIP The fasteners will come loose after the sidebags are removed. Be sure not to lose the fasteners. 1. Hole 2. Holder 4 1 3. Insert the fasteners through the holes in the sidebag into their holders, and then turn them clockwise until they stop. 1. Fastener To install a sidebag 1. Open the sidebag lid. 2. Place the sidebag on the bracket, and then align all holes in the sidebag with the holes in the holders on the bracket. 4-19 1. Fastener

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

INSTRUMENT AND CONTROL FUNCTIONS
4-19
4
To close a sidebag lid
1.
Fold the sidebag lid down so that
the latch snaps into place.
2.
Turn the key clockwise, and then
remove it.
To remove a sidebag
1.
Open the sidebag lid.
2. Turn the fasteners counterclock-
wise, and then remove the side-
bag by pulling it upward.
TIP
The fasteners will come loose after the
sidebags are removed. Be sure not to
lose the fasteners.
To install a sidebag
1.
Open the sidebag lid.
2.
Place the sidebag on the bracket,
and then align all holes in the side-
bag with the holes in the holders
on the bracket.
3. Insert the fasteners through the
holes in the sidebag into their hold-
ers, and then turn them clockwise
until they stop.
1. Fastener
1. Fastener
1
1. Hole
2. Holder
1. Fastener