2010 Yamaha Motorsports Road Star S Owners Manual - Page 22

INSTRUMENT AND CONTROL FUNCTIONS then go off for 3.0 seconds. If this occurs, have a Yamaha dealer check the vehicle. EAU11534 EAU45683 Multi-function meter unit G G 4 Engine trouble warning light " " This warning light comes on or flashes if a problem is detected in the electrical circuit monitoring the engine. If this occurs, have a Yamaha dealer check the self-diagnosis system. (See page 4-5 for an explanation of the self-diagnosis device.) The electrical circuit of the warning light can be checked by turning the key to "ON". The warning light should come on for a few seconds, and then go off. If the warning light does not come on initially when the key is turned to "ON", or if the warning light remains on, have a Yamaha dealer check the electrical circuit. 1 2 G G 3 1. Speedometer 2. Odometer/tripmeter/fuel reserve tripmeter/clock 3. Fuel gauge EWA12422 G two tripmeters (which show the distance traveled since they were last set to zero) a fuel reserve tripmeter (which shows the distance traveled on the fuel reserve) a clock a self-diagnosis device a brightness control mode TIP Be sure to turn the key to "ON" before using the "SELECT" switch " / " and "RESET" switch, except for setting the brightness control mode. WARNING Be sure to stop the vehicle before making any setting changes to the multi-function meter unit. Changing settings while riding can distract the operator and increase the risk of an accident. The multi-function meter equipped with the following: G a speedometer G a fuel gauge G an odometer 4-3 1 2 1. "SELECT" switch " 2. "RESET" switch / " unit is