2010 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 78
2010 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 78 highlights
1 2 3 4 5 6 7 8 9 10 11 1. 2. 3. 4. Engine oil drain bolt O-ring Spring Oil strainer Tightening torque: Engine oil drain bolt: 32 Nm (3.2 m·kgf, 23.1 ft·lbf) 1 8. Refill with the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. 4 3 2 1 Recommended oil: See page 10-1. Oil quantity: 1.25 L (1.32 US qt, 1.10 Imp.qt) TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECB00330 5. Clean the oil strainer with solvent. 6. Check the O-ring for damage and replace it if necessary. 7. Install the O-ring, oil strainer, compression spring and drain bolt. Tighten the engine oil drain bolt to the specified torque. NOTICE: Before installing the engine oil drain bolt, be sure to install the O-ring, compression spring and oil strainer.[ECB00321] 8-12 NOTICE G G Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. Make sure that no foreign material enters the crankcase. 9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil