2010 Yamaha Motorsports FX Nytro XTX Owners Manual - Page 58
2010 Yamaha Motorsports FX Nytro XTX Manual
Page 58 highlights
Periodic maintenance and adjustment 7. Remove the oil filler cap, cylinder head cap, and drain bolt to drain the oil from the oil tank. TIP G G G A " " mark is stamped on the crankcase near the engine oil drain bolt. Dispose of used oil according to local regulations. Skip steps 10-12 if the oil filter cartridge is not being replaced. 10. Remove the oil filter cartridge with an oil filter wrench. 1. Cylinder head cap 1. Oil filter cartridge TIP 1. Engine oil drain bolt (oil tank) An oil filter wrench is available at a Yamaha dealer. 11. Apply a thin coat of engine oil to the Oring of the new oil filter cartridge. 12. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 13. Install the engine oil drain bolts, and then tighten them to the specified torques. Tightening torques: Engine oil drain bolt (crankcase): 10 Nm (1.0 m·kgf, 7.2 ft·lbf) Engine oil drain bolt (oil tank): 16 Nm (1.6 m·kgf, 11 ft·lbf) 8. 9. Place an oil pan under the engine to collect the used oil. Remove the engine oil drain bolt to drain the oil from the crankcase. 1. Engine oil drain bolt (crankcase) 2. " " mark 52