2010 Yamaha Motorsports FX Nytro MTX SE 153 Owners Manual - Page 68
2010 Yamaha Motorsports FX Nytro MTX SE 153 Manual
Page 68 highlights
Periodic maintenance and adjustment Test the brake at a low speed when starting out to make sure that it is working properly. If the brake does not provide proper braking performance, inspect the brake for wear or brake fluid leakage. (See the following section for more details.) 2. Check the parking brake pads for wear by measuring the thickness of the pads. If the parking brake pads reach the wear limit, ask a Yamaha dealer to replace them. Checking the brake pads Check the brake pads for wear according to the following procedure. 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the shroud and the right side cover. (See page 46 for removal procedures.) 3. Check the brake pads for wear. If the brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1. Parking brake pad wear limit Parking brake pad wear limit: 1.2 mm (0.047 in) 3. Install the right side cover and the shroud. To adjust the parking brake As the parking brake pads wear, adjustment may be necessary to ensure proper brake performance. 1. Remove the shroud and the right side cover. (See page 46 for removal procedures.) 2. Loosen the parking brake pad adjusting bolt locknut and the parking brake pad adjusting bolt. 3. Loosen the parking brake cable locknut. 4. Turn the parking brake cable adjusting bolt in or out to adjust the cable length. 1. Brake pad wear indicator 2. Brake pad wear limit Brake pad wear limit: 4.7 mm (0.19 in) 4. Install the right side cover and the shroud. Checking the parking brake pads Check the parking brake pads for wear according to the following procedure. 1. Remove the shroud and the right side cover. (See page 46 for removal procedures.) 62