2010 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 95
2010 Yamaha Motorsports Big Bear 400 4x4 IRS Manual
Page 95 highlights
Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 10. Install the oil strainer, compression spring, Oring and engine oil drain bolt. Tighten the engine oil drain bolt to the specified torque. NOTICE: Before installing the engine oil drain bolt, be sure to install the O-ring, compression spring and oil strainer. [ECB00321] 1. O-ring 2. Oil filter element 6. Clean the oil strainer and oil filter element with solvent. 7. Check the O-rings for damage and replace them if necessary. 8. Install the oil filter element and O-ring. TIP Make sure that the O-ring is properly seated. 9. Install the oil filter element cover by installing the bolts, and then tighten them to the specified torque. Tightening torque: Engine oil drain bolt: 32 Nm (3.2 m·kgf, 23 ft·lbf) 8 11. Refill with the specified amount of the recommended engine oil, and then install and tighten the engine oil filler cap. 8-14