2010 Yamaha Motorsports Apex M-TX Owners Manual - Page 76
2010 Yamaha Motorsports Apex M-TX Manual
Page 76 highlights
Periodic maintenance and adjustment 5. Adjust the drive track deflection to specification. NOTICE: The right and left adjusting nuts should be turned an equal amount. [ECS00592] Drive track deflection Left adjusting nut Right adjusting nut 1. Left adjusting nut 2. Right adjusting nut More than specified Turn in Turn in Less than specified Turn out Turn out 6. Shifted to right 7. 8. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Lower the snowmobile to the ground. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) Slide runners Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Shifted to left 1. Slide runner 2. Wear limit height Slide runner wear limit height: 10.5 mm (0.41 in) 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 70
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71 -
72 -
73 -
74 -
75 -
76 -
77 -
78 -
79 -
80 -
81 -
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
 |
 |
