2010 Yamaha Motorsports Apex LTX Owners Manual - Page 19
2010 Yamaha Motorsports Apex LTX Manual
Page 19 highlights
Control functions and then push the "SELECT" button for at least 3 seconds while the snowmobile is stopped. 1 2 3 Odometer, tripmeter, and barometer modes 1 1. "SELECT" button 2. "RESET" button 3. Clock 2. 1. Odometer/tripmeter/barometer Pushing the "SELECT" button switches the display between the odometer mode "ODO", tripmeter modes "TRIP A" and "TRIP B", and barometer mode "BARO" in the following order: ODO → TRIP A → TRIP B → BARO → ODO To reset a tripmeter, push the "RESET" button for at least 1 second while the tripmeter is displayed. 3. Push the "RESET" button to change the hour setting, and then push the "SELECT" button. The minute digits will start flashing. Push the "RESET" button to change the minute setting, and then push the "SELECT" button. The clock starts when the "SELECT" button is released. TIP The clock must be set again when the battery is disconnected. Clock To set the clock 1. Push the "SELECT" button and "RESET" button simultaneously until the hour digits start flashing. Display brightness control This function allows you to adjust the brightness of the meter display to suit the outdoor lighting conditions. To adjust the display brightness 1. Turn the main switch to the off position. 2. Push and hold down the "SELECT" button. 13