2009 Yamaha Motorsports V Star Silverado Owners Manual - Page 77

2009 Yamaha Motorsports V Star Silverado Manual

Get 2009 Yamaha Motorsports V Star Silverado PDF manuals and user guides View all 2009 Yamaha Motorsports V Star Silverado manuals

Page 77 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU25080 Rear wheel EAU25142 To remove the rear wheel EWA10821 4. Remove the brake pedal free play adjusting nut, and then disconnect the brake rod from the brake camshaft lever. WARNING To avoid injury, securely support the vehicle so there is no danger of it falling over. 1. Loosen the axle nut. 1. Bolt 2. Final gear case 1. 2. 3. 4. 5. 6. 1. Axle nut Brake pedal free play adjusting nut Brake camshaft lever Bolt and nut (shoe plate) Brake torque rod Bolt and nut (swingarm) Brake rod 2. Disconnect the brake torque rod from the brake shoe plate by removing the bolt and nut. 3. Loosen the brake torque rod nut at the swingarm. 5. Remove panel A. (See page 7-8.) 6. Remove the bolts that secure the final gear case to the swingarm. 7. Lift the rear wheel off the ground according to the procedure on page 7-34. 8. While supporting the drive shaft, pull the rear wheel back to remove the following parts as an assembly: wheel, wheel axle, final gear case, and drive shaft. TIP Make sure to support the drive shaft as it is being pulled out. 7 7-36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-36
7
EAU25080
Rear wheel
EAU25142
To remove the rear wheel
WARNING
EWA10821
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1.
Loosen the axle nut.
2. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the bolt and nut.
3.
Loosen the brake torque rod nut at
the swingarm.
4.
Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
shaft lever.
5.
Remove panel A. (See page 7-8.)
6.
Remove the bolts that secure the
final gear case to the swingarm.
7. Lift the rear wheel off the ground
according to the procedure on
page 7-34.
8. While supporting the drive shaft,
pull the rear wheel back to remove
the following parts as an assem-
bly: wheel, wheel axle, final gear
case, and drive shaft.
TIP
Make sure to support the drive shaft as
it is being pulled out.
1.
Axle nut
1.
Brake pedal free play adjusting nut
2.
Brake camshaft lever
3.
Bolt and nut (shoe plate)
4.
Brake torque rod
5.
Bolt and nut (swingarm)
6.
Brake rod
1. Bolt
2.
Final gear case