2009 Yamaha Motorsports Raider Owners Manual - Page 30
2009 Yamaha Motorsports Raider Manual
Page 30 highlights
INSTRUMENT AND CONTROL FUNCTIONS load and thereby soften the suspension, turn the adjusting nut in direction (b). G To make the adjustment, use the special wrench and extension bar included in the additional tool kit, which was handed out separately at the purchase of the vehicle. G The spring preload setting is determined by measuring distance A, shown in the illustration. The shorter distance A is, the higher the spring preload; the longer distance A is, the lower the spring preload. With each complete turn of the adjusting nut, distance A is changed by 2.0 mm (0.08 in). 2 Spring preload: Minimum (hard): Distance A = 163 mm (6.42 in) Standard: Distance A = 172 mm (6.77 in) Maximum (soft): Distance A = 172 mm (6.77 in) 4 1. Special wrench 2. Extension bar 3. Tighten the locknut to the specified torque. NOTICE: Always tighten the locknut against the adjusting nut, and then tighten the locknut to the specified torque. [ECA10121] Tightening torque: Locknut: 30 Nm (3.0 m·kgf, 22 ft·lbf) EWA10221 WARNING This shock absorber assembly contains highly pressurized nitrogen gas. Read and understand the following information before handling the shock absorber assembly. G Do not tamper with or attempt to open the cylinder assembly. 1. Distance A 4-14