2009 Yamaha Motorsports Phazer GT Owners Manual - Page 35
2009 Yamaha Motorsports Phazer GT Manual
Page 35 highlights
Control functions Compression damping setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 7 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) Rebound damping force The rebound damping force of each shock absorber can be adjusted by turning its rebound damping force adjusting knob. To increase the rebound damping force, turn the adjusting knob in direction (a). To decrease the rebound damping force, turn the adjusting knob in direction (b). TIP The damping forces will not decrease past the minimum levels even if the adjusting knobs are turned out more than the minimum settings. ESU10936 Adjusting the spring preload of the center shock absorber and the rear torsion springs The spring preload can be adjusted by turning the adjusting ring (PZ50 / PZ50GT / PZ50MT / PZ50VT) or adjusting nut (PZ50RT) on the center shock absorber and the adjusters on the rear torsion springs. Adjust the spring preload as follows. Center shock absorber (PZ50 / PZ50GT / PZ50MT / PZ50VT) PZ50 / PZ50GT / PZ50VT (b) (a) 1. Rebound damping force adjusting knob Rebound damping setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 12 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) 1. Spring preload adjusting ring PZ50MT (b) (a) 1. Spring preload adjusting ring 29