2009 Yamaha Motorsports Grizzly 550 FI Auto. 4x4 EPS Special Edition Owners Ma - Page 41
2009 Yamaha Motorsports Grizzly 550 FI Auto. 4x4 EPS Special Edition Manual
Page 41 highlights
EWB00350 TIP A special wrench can be obtained at a Yamaha dealer to make this adjustment. WARNING POTENTIAL HAZARD Improper shock absorber assembly adjustment. WHAT CAN HAPPEN Uneven adjustment can cause poor handling and loss of stability, which could lead to an accident. HOW TO AVOID THE HAZARD Always adjust the shock absorber assemblies on the left and right side to the same setting. EBU19181 4 1. Special wrench Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running. 1. Set the light switch to "OFF". 2. Start the engine. (See page 6-1.) 3. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. Spring preload setting: Minimum (soft): 1 Standard: 3 Maximum (hard): 5 4-23