2009 Yamaha Motorsports Grizzly 550 4x4 EPS Owners Manual - Page 128
2009 Yamaha Motorsports Grizzly 550 4x4 EPS Manual
Page 128 highlights
12. Pour the recommended coolant into the reservoir to the maximum level mark, and then install the reservoir cap. Antifreeze/water mixture ratio: 1:1 Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines Coolant quantity: Radiator capacity (including all routes): 1.99 L (2.10 US qt, 1.75 Imp.qt) Coolant reservoir capacity (up to the maximum level mark): 0.24 L (0.25 US qt, 0.21 Imp.qt) ECB00401 1. Coolant reservoir hose 8 8. After draining the coolant, thoroughly flush the cooling system with clean tap water. 9. Replace the coolant drain bolt washer if it is damaged, install the coolant drain bolt, and then tighten it to the specified torque. Tightening torque: Coolant drain bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 10. Connect the coolant reservoir hose. 11. Pour the recommended coolant into the radiator until it is full. 8-35 NOTICE If coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since it is harmful to the engine. G If water has been used instead of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. G