2009 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 133
2009 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 133 highlights
2. Remove the tailpipe by pulling it out of the muffler. 3. Tap the tailpipe lightly, and then use a wire brush to remove any carbon deposits from the spark arrester portion of the tailpipe and inside of the tailpipe housing. Tightening torque: Tailpipe bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) EWB01910 WARNING POTENTIAL HAZARD Improper cleaning of the spark arrester. Hot exhaust system. WHAT CAN HAPPEN Could injure the eyes. Could cause burns. Could cause carbon monoxide poisoning, possibly leading to death. Could start a fire. HOW TO AVOID THE HAZARD When cleaning the spark arrester: Always let the exhaust system cool prior to touching exhaust components. Do not start the engine when cleaning the exhaust system. EBU23920 8 1. Tailpipe 2. Spark arrester 4. Insert the tailpipe into the muffler and align the bolt holes. 5. Install the bolts and tighten them to the specified torque. V-belt cooling duct check hose If dust or water collects in the V-belt cooling duct check hose, remove the hose and clean it. 8-35