2009 Yamaha Motorsports Grizzly 350 Owners Manual - Page 101
2009 Yamaha Motorsports Grizzly 350 Manual
Page 101 highlights
1 dition, the final gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the final gear oil level 1. Place the ATV on a level surface. 2 TIP The final gear oil level must be checked on a cold engine. 2. Remove the final gear oil filler bolt, and then check the oil level in the final gear case. TIP The oil level should be at the brim of the filler hole. 8 1. "CD" specification 2. "ENERGY CONSERVING II" 9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 10. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary. EBU23383 Final gear oil The final gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In ad8-15