2009 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 92

2009 Yamaha Motorsports Grizzly 125 Automatic Manual

Get 2009 Yamaha Motorsports Grizzly 125 Automatic PDF manuals and user guides View all 2009 Yamaha Motorsports Grizzly 125 Automatic manuals

Page 92 highlights

1 2 3 4 5 6 7 8 9 10 11 TIP The sponge material should be wet but not dripping. 11. Pull the sponge material over the air filter element frame. 12. Install the washer and bolt. ECB00450 14. Install the air filter case cover by installing the screws. 15. Install the breather hose and then tighten the clamp screw. 16. Install the seat. NOTICE Be sure to install the washer with the bent edge facing upward as shown. 1 TIP The air filter element should be cleaned every 20- 40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely dusty areas. Each time the air filter element maintenance is performed, check the air inlet of the air filter case for obstructions. Check the air filter case rubber joint to the carburetor fittings and the rubber joint manifold fittings for an air-tight seal. Tighten all fittings securely to avoid the possibility of unfiltered air entering the engine. ECB00460 NOTICE G G 1. Washer 13. Install the air filter element into the air filter case. 8-18 Make sure that the air filter element is properly seated in the air filter case. Never operate the engine with the air filter element removed. This will allow unfiltered air to enter the engine, causing rapid engine wear and possible engine damage. Additionally, operation without the air filter element

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
8-18
1
2
3
4
5
6
7
8
9
10
11
TIP
The sponge material should be wet but not drip-
ping.
11.
Pull the sponge material over the air filter ele-
ment frame.
12.
Install the washer and bolt.
NOTICE
ECB00450
Be sure to install the washer with the bent edge
facing upward as shown.
13.
Install the air filter element into the air filter
case.
14.
Install the air filter case cover by installing the
screws.
15.
Install the breather hose and then tighten the
clamp screw.
16.
Install the seat.
TIP
The air filter element should be cleaned every 20–
40 hours. It should be cleaned and lubricated more
often if the ATV is operated in extremely dusty ar-
eas. Each time the air filter element maintenance
is performed, check the air inlet of the air filter case
for obstructions. Check the air filter case rubber
joint to the carburetor fittings and the rubber joint
manifold fittings for an air-tight seal. Tighten all fit-
tings securely to avoid the possibility of unfiltered
air entering the engine.
NOTICE
ECB00460
●
Make sure that the air filter element is prop-
erly seated in the air filter case.
●
Never operate the engine with the air filter el-
ement removed. This will allow unfiltered air
to enter the engine, causing rapid engine
wear and possible engine damage. Addition-
ally, operation without the air filter element
1. Washer
1