2009 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 73
2009 Yamaha Motorsports FX Nytro RTX Manual
Page 73 highlights
Periodic maintenance and adjustment 5. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Lubrication point ESU12852 Replacing a headlight bulb 1. 2. 3. Remove the shroud. (See page 44 for removal procedures.) Disconnect the headlight coupler. Remove the bulb holder cover. 1. Do not touch the glass part of the bulb. Bulb type: Halogen bulb 6. 7. 1. Headlight coupler 2. Bulb holder cover Install the bulb holder cover, and then connect the headlight coupler. Install the shroud. ESU12861 Adjusting the headlight beams 1. 2. 4. Unhook the headlight bulb holder, and then remove the burnt-out bulb. Remove the shroud. (See page 44 for removal procedures.) Turn the headlight beam adjusting screw in or out to adjust the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the headlight beam adjusting screw in direction (b). 1. Bulb holder 67