2009 Yamaha Motorsports FX Nytro RTX SE Owners Manual - Page 21
2009 Yamaha Motorsports FX Nytro RTX SE Manual
Page 21 highlights
Control functions ESU10560 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 1. Locknut 2. Adjusting bolt 3. Tighten the locknut securely after adjusting the brake lever. ESU10581 Parking brake lever 1. Brake lever TIP When the brake lever is operated, the brake light will illuminate. ECS00060 When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. NOTICE Make sure that the brake lever end does not project out over the handlebar end. This will help prevent brake lever damage when the snowmobile is placed on its side for service. The brake lever is equipped with a position adjuster. To adjust the brake lever position: 1. Loosen the locknut. 2. While lightly pushing the brake lever in direction (a), finger tighten the adjusting bolt to set the brake lever to the desired position. 1. Parking brake lever To release the parking brake, move the parking brake lever to the right. 15