2009 Yamaha Motorsports Big Bear 400 4x4 IRS Owners Manual - Page 140
2009 Yamaha Motorsports Big Bear 400 4x4 IRS Manual
Page 140 highlights
ECB00670 NOTICE Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. 10. Place the headlight unit in the original position, and then install the screws. 11. Place the headlight assembly in the original position, and then install the screws. 12. Connect the coupler which was disconnected in step "1". 13. Adjust the headlight beam. (See page 8-48.) EBU25551 1. Headlight beam adjusting screw EBU25631 Adjusting a headlight beam 8 ECB00690 Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Open the storage compartment. (See page 4-20.) 2. Remove the tail/brake light assembly by removing the nuts together with the washers. NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). 8-48