2009 Yamaha Motorsports Apex Owners Manual - Page 80

2009 Yamaha Motorsports Apex Manual

Get 2009 Yamaha Motorsports Apex PDF manuals and user guides View all 2009 Yamaha Motorsports Apex manuals

Page 80 highlights

Troubleshooting G Be sure to pull the lead covers back over the terminals completely. If the terminals are exposed, they could come into contact with the frame or a metal part of the snowmobile and this can cause electrical system damage or A FIRE HAZARD. ECS00650 NOTICE Use the connecting leads to jump-start the snowmobile only. Do not use the connecting leads for any other purpose. To start the engine using the booster battery 1. Apply the parking brake and turn the main switch to the off position. 2. Remove the shroud and the right side cover. (See page 43 for removal procedures.) 3. Remove the red (+) connecting lead from the lead holder and move it away from the black (-) connecting lead. NOTICE: Be sure to connect the red (+) jumper cable to the red (+) connecting lead and the black (-) jumper cable to the black (-) connecting lead. Do not reverse the connections. [ECS00661] 4. Pull the red (+) connecting lead cover to expose the terminal through the slit in the cover, and then connect the red (+) jumper cable to the red (+) connecting lead. 5. 6. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. Connect the black (-) jumper cable to the negative (-) terminal of the booster battery. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Troubleshooting
74
●
Be sure to pull the lead covers back over
the terminals completely. If the termi-
nals are exposed, they could come into
contact with the frame or a metal part of
the snowmobile and this can cause elec-
trical system damage or A FIRE HAZ-
ARD.
NOTICE
ECS00650
Use the connecting leads to jump-start the
snowmobile only. Do not use the connect-
ing leads for any other purpose.
To start the engine using the booster battery
1.
Apply the parking brake and turn the
main switch to the off position.
2.
Remove the shroud and the right side
cover. (See page 43 for removal proce-
dures.)
3.
Remove the red (+) connecting lead from
the lead holder and move it away from
the black (–) connecting lead.
NOTICE:
Be sure to connect the red (+) jumper
cable to the red (+) connecting lead
and the black (–) jumper cable to the
black (–) connecting lead. Do not re-
verse the connections.
[ECS00661]
4.
Pull the red (+) connecting lead cover to
expose the terminal through the slit in the
cover, and then connect the red (+) jump-
er cable to the red (+) connecting lead.
5.
Connect the other end of the red (+)
jumper cable to the positive (+) terminal
of the booster battery.
6.
Connect the black (–) jumper cable to the
negative (–) terminal of the booster bat-
tery.