2008 Yamaha Motorsports Vino Classic Owners Manual - Page 22
2008 Yamaha Motorsports Vino Classic Manual
Page 22 highlights
Fuel INSTRUMENT AND CONTROL FUNCTIONS EAU32483 Fuel tank cap 1 2 1 NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. EWA10130 EAU13211 Fuel 1 w 3 2 4 5 6 7 8 9 To install the fuel tank cap 1. Insert the fuel tank cap into the tank opening with the key inserted in the lock and with the marks on the cap and tank aligned. 2. Turn the key counterclockwise to the original position, remove it, and then close the lock cover. ZAUM00** Make sure that the fuel tank cap is properly installed before riding. ZAUM00** 1. Fuel tank cap lock cover 2. Match marks 1. Fuel tank filler tube To remove the fuel tank cap Slide the lock cover open, insert the key into the lock, and then turn it 1/4 turn clockwise. The lock will be released and the fuel tank cap can be removed. Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown. EWA10880 w 8 Do not overfill the fuel tank, otherwise it may overflow when the fuel warms up and expands. Avoid spilling fuel on the hot engine. ECA10070 cC Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may 3-6