2008 Yamaha Motorsports Road Star Silverado Owners Manual - Page 59
2008 Yamaha Motorsports Road Star Silverado Manual
Page 59 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR 11. Pour only 2.5 L (2.6 US qt) (2.2 Imp.qt) of the specified amount of recommended engine oil through the filler hole, insert the dipstick, and then tighten the oil filler cap. 12. Start the engine, rev it several times, and then turn it off. 13. Remove the engine oil filler cap, and then gradually fill the oil tank with the remaining oil quantity while regularly checking the oil level on the dipstick. Recommended engine oil: See page 8-1. Oil quantity: Without oil filter cartridge replacement: 3.70 L (3.91 US qt) (3.26 Imp.qt) With oil filter cartridge replacement: 4.10 L (4.33 US qt) (3.61 Imp.qt) 1. O-ring 1. Oil filter cartridge 2. Torque wrench NOTE: Make sure that the O-ring is properly seated. 9. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 6 10. Install the engine oil drain bolts, and then tighten them to the specified torques. Tightening torques: Engine oil drain bolt (crankcase): 43 Nm (4.3 m·kgf, 31 ft·lbf) Engine oil drain bolt (oil tank): 43 Nm (4.3 m·kgf, 31 ft·lbf) NOTE: Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. 6-13